Rescue cleanse clear choice

Rescue Cleanse 32oz & Herbal Pre-cleanse

Sub Solution synthetic urine Practice kit

Sub-Solution & Practice Kit Combo

Quick Luck & Practice Kit Combo

Keep calm and practice first. This combo deal includes a Quick Luck premium premixed synthetic urine kit and our Practice Kit.

$135.00
Availability: In stock
SKU
2319

Pass all of your supervision tests with confidence by practicing first with the new Clear Choice® Practice Kit. Practice using different heat sources to reach the optimal temperature range. Our Clear Choice® Quick luck is a 100% effective premium premixed synthetic urine sample designed to be undetectable and toxin-free. All Clear Choice Synthetic Urine is BIOCIDE FREE!

Clear Choice Sub-Solution was launched in 2003, 16 years later this product still thrives as being the best of its class and in 2018 our new Premium premixed formula was launched as the Quick Luck Kit.

Our secret urine formula is made from 11 different chemical compounds including uric acid and urea that mimic real human urine and is balanced for pH, specific gravity and creatinine just to mention a few. It comes with our patented heat activator formula that raises the urine sample’s temperature to normal body temperature.

This is the only pre-mixed, synthetic urine of its kind and it rivals any other product out there on the market.

100% EFFECTIVE

  • Our TOP secret formula contains Uric acid and urea and just like the real deal!

  • Balanced for pH, specific gravity and creatinine.

  • Totally Undetectable

  • BIOCIDE FREE

  • Standard Size 3oz Container

  • Toxin Free Synthetic Urine

  • Unisex for Male or Female Use

  • Safety sealed for your protection

  • Includes 2 Clear Choice heat pads

  • Includes our Heat Activator Powder – Raises Temperature within Seconds


THE QUICK LUCK KIT INCLUDES:

  • 3oz of premixed premium synthetic urine

  • Easy-to-read temperature strip

  • 2 Clear Choice heat pads

  • Heat activator powder

  • Spout cap for realistic pouring

  • Easy to follow instructions brochure


THE PRACTICE KIT INCLUDES:

  • 3oz Mixing container

  • Easy-to-read temperature strip

  • Clear Choice heat pad

  • Heat activator powder

  • Spout cap for realistic pouring

  • Easy to follow instructions on the box

Write Your Own Review
You're reviewing:Quick Luck & Practice Kit Combo

Frequently Asked Questions

Can I reheat my synthetic urine?

Yes, if the seal is not broken, you may reheat you synthetic sample as many times as you like.

Can I microwave my urine sample?

Yes, you can microwave it for 7 second increments on the day of your test, but you will need to remove the lid. Once you remove the lid you will need to use your product within 8 hours.

What If I opened/broke the seal on the Quick Luck and did not need to use it, can I keep it for a later time?

Yes. Once the solution is mixed/opened you have 8 hours to do one of 3 things with it;
1) Use it
2) Put it in the fridge to use in the next 48 hours.
3) Put it in the freezer. (It will keep for up to 6 months)

My product is about to expire can I return or exchange it?

If you received a package with less than 6 months of remaining shelf life then we will replace it a week before it expires. You may contact our customer service dept.
NOTE: We will only authorize replacements for unopened sealed products that had less than 6 months of shelf life from the date you received it. Expired products shouldn't be used; products effectiveness will have decreased!!

How do I use the heat activator powder?

"Take out the heat activator powder and gently tap the vial to loosen the powder. Carefully pour about 1/8 of the powder into the vial's cap, then add it to the urine. Do not pour directly from the vial into the urine! It's very easy to overpour if you do this. Put the cap back on the urine, shake it gently for 10-15 seconds, then check the temperature strip. Repeat as necessary to get the urine to 94 - 100 degrees. Do not add the whole vial to the sample in one go.
Do not mix the heat activator in the sample cup.
If your starting temperature is low you may need to use the complete vial, but still add gradually
**Please be aware** If your temperature strip is not showing a reading, it means your sample is TOO HOT or TOO COLD"

How quickly does the heat activator work?

The heat activator will work almost instantly. We suggest giving it about 5 -10 seconds to fully react before adding more heat activator.

If I stopped using drugs at least 48 hours prior to the use of the product, will I still pass?

The sub-solution is a synthetic urine.Therefore, you will not be submitting any of your own urine, so there is no need to abstain from drugs.

Which product is more effective Sub Solution or Quick Luck?

Both products are equally effective. They both use the same Biocide free urine formula. The Quick Luck would be better for a random test, as no mixing is required, while Sub Solution could be used for a test that is scheduled and not random, however Sub Solution does not come with heating pads, it only comes with the heat activator.

My temperature strip is not showing any indication, I think its broken.

It is more likely that your sample is either too hot or too cold. Either way it will not show any indication.

My heating pad isn’t working. I can’t feel any heat.

Once activated the heat pad will barely feel warm to the touch and this is perfectly normal as the heat pad in combination with your body heat will raise the urine to its ideal temperature within one (1) hour. This is not the type of heat pad you would use in the snow, it will only feel very slightly warm to ensure your sample is not overheated.

The heat activating powder is not working. What do I do?

You need to determine if the sample is too warm, or too cold. If it it is too cold than you should add more heat activator. If it is too warm, then you need to cool your sample down. So long as the activator is still in a powder state it will still be effective. If the activator is in a liquid or solid state it means that the activator has already reacted with moisture in the air and can no longer be used. You should open the heat activator only when you are ready to use it..

How long will the heat activator hold the temperature?

The heat activator will not hold the temperature, it will only bring your sample up to temperature. For this reason it is best that the heat activator is used as close to the time you’re submitting your test as possible.

Will the heat activator show as an adulterant on my test?

No, the heat activator has a reaction with water, and everything remaining after the reaction will not throw up any red-flags.

*Read all information and instructions carefully before proceeding.*

  • Quick Luck® comes with an easy-to-read temperature strip. Your realistic target temperature range is between 94°F and 100°F.

  • To avoid a false temperature reading make sure you store the sample with the temperature strip facing away from your body.

  • Combining heat sources or adding an excessive amount of Heat Activator may overheat the solution.

  • Once the safety seal is broken, just like real urine the sample will start growing bacteria within a couple of days. If not used, the sample can be refrigerated for up to 48 hours or frozen for up to 6 months.

Synthetic Sample

The bottle holds 3oz of the pre-mixed solution. Do not break the safety seal until the day of use. Once the seal is broken you can opt to change the cap for the spout cap provided which closely resembles the flow of the urine when poured.

Heating Options

Your sample should be heated to an optimal temperature of 94°F and 100°F using a heat pad and topped off with heat activator if required.

OPTION 1: Heat Pad

Remove the paper backing and stick to the bottle. Please allow up to 1 hour to reach the optimal temperature. The heat pad will provide up to 10 hours of heat once activated. Never apply more than 1 heat pad at a time.

OPTION 2: Heat Activator (optional)

The use of heat activator is optional. It comes in handy in last minute situations like when there's no time to wait for a heat pad to heat up or in a situation where you have applied a heat pad but realize you haven't reached optimal temperature by the time you are ready to prank.

Keep in mind when using the heat activator that it's easier to increase the temperature of your sample than to decrease it. Therefore you should add very small amounts of powder at a time, then replace the cap, shake gently, wait 10 seconds and take a temperature reading. If more heat is required then repeat the previous process until you reach optimal range. The logic here is the cooler your sample the more heat activator will be required. Warmer the sample less heat activator will be required. Note that you might not see a reading if you are out of the temperature strip's range. A sample in the optimal range should only feel slightly warm to the touch. If your bottle feels warm but doesn't see a temperature reading this is usually an indication that you have overheated your bottle.

**CAUTION: Never microwave the bottle with its cap on and/or heat pad applied.